How To Reset Zmodo Camera To New Wifi

If your Zmodo camera won't connect to WiFi, and so follow this guide to fix the issue quickly. You lot need to prepare this trouble equally soon as possible because the Zmodo camera needs WiFi to become the live stream, motion detection, and other phone alerts.

To fix a Zmodo photographic camera not connecting to WiFi, y'all should make sure the WiFi connectedness works and meets all the requirements. Nigh of the time, the consequence is related to the frequency that the camera is using, more specifically the router's WiFi may be operating at 2.4Ghz and 5Ghz and the photographic camera is trying to connect to the wrong SSID.

In other words, the camera is operating on 2.4Ghz frequency but it'south connecting to the 5Ghz SSID (which is the wireless proper name). Follow the troubleshooting tips below to fix the issue.

Zmodo camera can't connect to the internet (WiFi)

In 90% of the cases, this problem with the Zmodo camera happens if y'all are using a dual-band router. That means the router offers 2 WiFi signals, ii.4Ghz, and 5Ghz. Your photographic camera may only be able to connect to 2.4Ghz and non 5Ghz (or vice versa), so it can get stuck attempting to connect to both frequencies of your dual-band router.

To fix the issue of the Zmodo camera not connecting to the internet only rename the carve up SSDI's (WiFi name) and so you can differentiate between them. Follow the steps.

Access your router settings (usually by typing the IP address of the router on the web browser and log in with your username/countersign).
Locate the WiFi menu.
If your router is dual-band, you lot should see two WiFi names there (1 is 2.4Ghz, the other one is 5Ghz). Rename each of the SSID using different names. For example, rename the first i "MyWiFi2.four" and the other one "MyWiFi5".
Salvage the settings. Additionally, make certain your router is using the WPA or WPA2 for the encryption mode.

Let'south assume that you lot have a Zmodo photographic camera that works on 2.4Ghz only. Since we renamed both WiFi names of the router, you can connect the photographic camera directly to the 2.4Ghz signal which above we renamed as "MyWiFi2.4". Connect to information technology and the camera will offset to piece of work, no more than failed connection.

Zmodo camera doesn't take the WiFi password

Here'due south an issue with some of the Zmodo cameras: they don't accept WiFi passwords that are more 13 characters long. Let'southward say your WiFi password contains 20 characters, if you enter it on the Zmodo camera app, it won't connect.

It's a weird issue but it happens. The newer Zmodo models have this problem stock-still, simply non some of their camera models. There'south no prepare for this, all you lot have to practise is to alter the password of your WiFi and use one that contains less than 13 characters.

Troubleshoot the WiFi setup (of Zmodo cameras)

Check if the WiFi point is working in the starting time place. Mayhap the photographic camera tin can't connect because the WiFi doesn't piece of work at all. Try to connect to the WiFi using your phone, or a computer, or any other device but to ensure that the internet works.

If it seems that the other devices connect fine to the cyberspace, then reboot the router and try again. Sometimes rebooting a device tin exercise wonders.

Next check the WiFi strength, the signal must be potent to encompass your Zmodo photographic camera. At the aforementioned time, brand sure the camera is not far abroad from the router and that it's within the nominal coverage. You lot can bring the photographic camera closer just to see if it connects.

A few tips on how to bank check the WiFi signal strength:

Check the WiFi symbol on your phone or tablet, it's displayed on the corner of the screen, and make sure all the bars are filled. The more than bars, the stronger the cyberspace.
Download apps equally NetSpot, WiFi Analyzer, or Wireshark to exam out the WiFi signal's strength.

For some smartphones, y'all volition need to disable your 3G/4G LTE data connection during setup. Once you have configured your device, yous can re-enable your 3G/4G LTE data connexion.

If the Status Low-cal is blinking green on the camera, try removing special characters and spaces from the SSID (WiFi network name) like "?" or "!". Also, brand sure the app and the camera are updated to the latest firmware versions.

If the WiFi is okay merely you're all the same having issues, follow the steps beneath to troubleshoot your router for the SmartLink setup.

Access your wireless router settings.
Find the tab or settings for the Wireless.
Find the choice called Wireless Network Manner.
Set the wireless network mode of your 2.4GHz wireless network to 802.11b just, 802.11g only, or 802.11b/k only.
Retry the SmartLink setup (or any Zmodo phone app that you lot're using) from your smartphone while connecting to this network.
After the phone app successfully connects your wireless device to the WiFi network, you lot can change your settings back to their original value. The wireless device volition automatically connect to your network.

Determination

Zmodo photographic camera non connecting to the WiFi is most of the time related to dual-band routers and you demand to rename the WiFi names for ii.4Ghz and 5Ghz. That way the photographic camera will differentiate both signals and correct them to the right one. Leave a comment if you can't solve the problem, or contact the manufacturer.

Source: https://securitycamcenter.com/zmodo-wont-connect-to-wifi-fix/

Posted by: craighatiagoorah.blogspot.com